CGDI Prog Key Programmer read BMW CAS3 ISN by OBD

 CGDI Prog BMW MSV80
Connect CGDI Prog key programmer with laptop and vehicle (shown as picture below)
Open CGDI Prog software on desktop
Select BMW Read DME ISN function

 

Click on Read CAS ISN
Reading data
Please remove the key from the ignition
The CAS ISN data was read successfully.

Yanhua BMW-FEM F-series Car OBD Key Programmer

Yanhua BMW FEM Key Programmer is the advanced tool for BMW F-chassis FEM system key programming by OBD. Supports online update and offline operation , safe and stable, easy to operate, it is for FEM vehicles till 2017

 

Top 4 Reasons To Get Yanhua BMW-FEM Key Programmer:

1. Update Online

2. Supports offline operation, safe and stable, easy-to-use

3. Supports latest FEM system vehicles till 2017

4. No tokens needed
Yanhua BMW-FEM Key Programmer Support BMW F-chassis Car List:

1 Series             F20/F21                            2011-2017
2 Series             F22/F23/F45/F46            2014-2017
3 Series/GT       F34/F35                            2012-2017
4 Series             F30/F31/F32/F33/F36     2014-2017
X5                       F15                                     2014-2017
X6                       F16                                     2015-2017

VXDIAG VCX NANO PRO For GM/FORD/MAZDA/VW/HONDA/VOLVO/TOYOTA/JLR OBD2 Auto Diagnostic Tool

VXDIAG VCX NANO PRO 7 In 1 Introduction:

Model name:VCX NANO PRO 7 In 1
Software Version:Each software has different version
Update:By link
Car Models:GM/FORD/MAZDA/VW/HONDA/VOLVO/TOYOTA/JLR
Multi-languages:  English/Japanese/Portuguese/Romanian/Korean/Dutch/Polish/Turkish/Spanish/French/Italian/Croatian/Danish/German/Swedish/Finnish/Slovenian/Czech/Russian/Greek/Chinese
Functions:Diagnostic interface
Connection:By OBD2.
Computer requirements:XP/WIN7/WIN8/WIN10

Tips on using VXDIAG VCX NANO Pro:

1. Close Antivirus software when install the tool.
2. The package only come with Ford/Mazda, GM, VW software, if you need Toyota, Honda, Land Rover/Jaguar, Volvo software as well. If you need more software, need pay extra to get the authorization

VXDIAG VCX NANO PRO 7 In 1 Functions:

1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
2. Live Data-stream with Recording & Playback Functions for Main ECUs
3. Read & Clear Diagnostic Trouble Codes (DTCs)
4. Set, Adjust or Remove Speed Governors
5. Automatic vehicle recognition
6. New Software Re-flash for Existing ECUs
7. All Other Dealer Functions
8. Steering Angle Resets
9. Guided Fault Finding
10. Program New Keys
11. DPF Regeneration
12. Brake Bleeding
13. Injector Coding

VXDIAG VCX NANO PRO–GM

Version:2016.02
Compatible Software:
Support PC-based diagnostics with rollout of the Global Diagnostic System GDS & GDS2
Support GM TIS2WEB online Service Programming System (SPS) with your own G-M account.
Support Tech2Win application to offering a larger screen with all of the Tech 2 tool functionality

Global Diagnostic System (GDS & GDS2)
New Diagnostic Application Software required for all GM Global Architecture (Global A) Vehicles.
GDS & GDS2 is software which runs on a specific PC. Updates received via TIS2Web.

Service Programming System (SPS):
You need have your own G-M account if you want to do online programming.
Passthrough programming on G-M past model and Global A vehicles
Increase reprogramming speed 20-70% and get ready to service new models

For pass-through programming of electronic control units on all vehicles built since 1996 and future model releases. The VCX Nano KIT is between 20% and 70% faster than Tech 2.For example, on a new Tahoe hybrid with 7 ECUS, it would normally take 2 full hours to reprogram. But, with VCX Nano the process is completed in just 45 minutes. That’s a 64% difference and means you could service 10vehicles rather than 4in an 8-hour day! The potential to increase revenues is dramatic.

Tech2Win Function:

Tech2Win, an application version of the Tech 2 and CANdi (Control Area Network diagnostic interface) moduleTech2Win can be used during a vehicle road
test, offering a larger screen with all of the Tech 2 tool functionality. The Tech2Win application offers all of the features and functions of the Tech 2 for Opel, For Saab etc.

Support all models of Cherolet,Buick and Cadillac, multi-languages selection, support OEM softwares of for gm gds2 and tech2win, run gds2 on Vmware. Support online diagnostic and programming as OEM tool.

VXDIAG VCX NANO PRO–FORD&MAZDA

Ford Version: IDS V101
Mazda Version:IDS V104

Can diagnose cars till 2017, it support online programming, one device support both Ford IDS and Mazda IDS.

Functions tested successfully:

Record and play back live data for ABS, PCM…tested ok
Program and Install new ECUs (PCM, ABS)…tested ok
Read and Clear DTCs…tested ok
Program New Keys for Mazda 6…tested ok
Set, adjust or remove speed governors…tested ok
DPF Regeneration…tested ok
Automatic vehicle recognition…tested ok
All other dealer functions…tested ok
Reset steering angle…tested ok
Find guided fault…tested ok
Injector Coding…tested ok

VXDIAG VCX NANO PRO–VW

VW Version: ODIS 4.0

Software Features:
Providing drivers consistent with international standard SAE-J2534 / SAE-J2534-1;
VCX is a standard Passthru programming tool, which can do online ECU programming;

VCX Interface Key Features:

1. Fully compatible with SAE J2534;
2. Especially for cars, and all vehicles protocols are compatible with dual Cell processors;
3. Design adapters and cables with self-determination;
4. Fits CE and FCC hardware;
5. Fireware can be updated;

Support protocols as below:

1.K line (ISO9141-2)
2.High-speed CAN (ISO 11898-2)
3.Low-speed CAN (ISO 11898-3)
4.J1850 (SAE J1850)
5.UDS
6.PWM

VXDIAG VCX NANO PRO–Volvo

Software Version: VIDA 2014D

VXDIAG VCX NANO PRO–Toyota

Software Version: Techstream V12.10.019

VCX Software Features:

Providing drivers consistent with international standard SAE-J2534 / SAE-J2534-1;
VCX is a standard Passthru programming tool, which can do online ECU programming;

VXDIAG VCX NANO PRO–LAND ROVER &JAGUAR

LAND ROVER &JAGUAR Version:SDD V149

VXDIAG VCX NANO PRO–Honda
Honda Version:HDS V3014.011

Icarscan diagnostic adapter – a must tool for small automotive repair shop

I am looking for a working cheap diagnostic maintenance tool, which is allowed me to add any car brands / add special functions as my will. So Icarscan diagnostic adapter is such a must tool,  to have any 5 car brands + 3 kinds of special functions, in this personalized customization times, Icarscan does a great job, it is very user-friendly and cost effective.

Details: from outside to inside
Icarscan diagnostic is a smallest Orange Bluetooth adapter without USB cable. It is designed with 16pin communicating with the vehicle’s OBDII port.
2017 New Launch X431 ICARSCAN Full Systems for Android/IOS with 5 Car Software and 3 Special Function Software free Update Online
 Launch X431 ICARSCAN
How to use Icarscan?
Device to prepare: IOS or Android smart phone
Procedure:
Use smart phone to scan the QR code on the back of the package.
Download M-diag APK
Register User and login -> active Icarscan device-> install Icarscan device (see below picture)
2017 New Launch X431 ICARSCAN Full Systems for Android/IOS with 5 Car Software and 3 Special Function Software free Update Online
Click “Vehicle diagnosis” to download car brands (up to 5 BMW, Benz, Audi, Opel, VW) and “Special tools” to download special functions (up to 3 incl. Reset Oil, Injector, reset DPF), besides the “Demo”. As it claims it can cover the generic OBD, CAN bus, and proprietary protocols of over 70 car manufacturers and2, 500 car models), that means it is allowed to buy more car brands if I need them, as for the price, take several brands for example, BMW $49.95, Benz $49.95, Audi $49.95, Opel $39.95, VW $39.95, Chrysler $39.95, Proton $34.95, Chinese Geely $34.95, etc.
Finally, to diagnose and do reset work. I confirm Icarscan could work as it’s described. Generally speaking, after going through the specific brand it can access to the full systems and perform full function diagnosis incl. reading/ clearing trouble codes, data stream, actuation test, adaptation, ECU coding & programming, and special functions.
And after choosing the specific special tool, covers not only one model. (See operating pictures at the last paragraph.)
The running speed going through from one page to another page is reasonable, you need not worry it may running slowly.
A nice feature is its personal settings, click “Mine”, I am allowed to check “My Report”, “My purchase History” and “Change password”.
As for the update, I will be prompted when it detects the newest update, so I do not worry it can’t update any longer.

How to Program DAF keys with FVDI2, VCI Lite or VCI 560

There are three optional solutions of programming a DAF key using different DAF diagnostic tools/key programmers (FVDI2, VCI Lite (V1), VCI 560), which may help make keys in a cost-effective method.
Option I: Flyobd FVDI2 DAF commander: 
It’s the cheapest way to program a DAF key with FVDI2 commander.
How to making a DAF key with FVDI2 DAF?
Note: Before programming keys, all present keys are reset and can be programmed on the same immobilizer only.
Start FVDI2 software for DAF
Select “Key learning”
Press “Next” to go on
Put the key to be programmed into the contact and switch it to position contact-ON
Insert Key 1 and press “Next”
The key is programmed successfully!
Amount of keys programmed: 1
To learn the next key, press “Next”
To fish key learning, press “Exit”
Option II: DAF VCI 560 (genuine): $3550
Option III: VCI Lite (V1) (copy version of VCI-560): $800
First, DAF VCI lite or VCI 560? Here list the differences.
* price
new DAF VCI lite (V1)for $800, original VCI 560 for $3550
* connection
DAF VCI lite used via USB connection, VCI 560 used via WIFI & USB connection
* LED display
VCI lite without LED display, VCI-560 kit with LED indicators
* PCB (hardware)
VCI lite hardware lacks one part on PCB, compared to VCI-560
(that missed part is not needed for any diagnosis, reprogramming, configuration)
* via OBD
VCI lite cannot see ignition via OBD, VCI-560 can do that via OBD
* function
DAF VCI 560 supports SCR/AdBlue removal, power increase, language programming with DAVIE Configurator (DEVIK)
VCI-560 also supports special programming and Service Level see DAVIE Developer Tool (DEVIE DT)
However, functions above are not listed in the DAF VCI lite package; that is, you need to buy in the DAF company.
In short, no matter VCI 560 or the replacement VCI Lite (V1), both work well on DAF trucks almost the same except some aspects above. If you do not care about original or not, VCI Lite should be a good choice for you, which almost has the same functions as VCI-560 but at a lower cost. DAF VCI Lite (V1) is more cost-effective.
So, how to program a DAF key using VCI 560 or VCI Lite (V1)?
Start DAVIE software
Go to Immobilizer (safety/security system)
Then programming

Program keys

before programming keys, all present keys are reset and can be programmed again in the same immobilizer only
Match immobilizer
Before installing a new immobilizer unit, perform the following actions:
1- switch off contact
2- exchange the immobilizer unit
3- switch on contact
Good luck when program daf keys with FVDI2 or VCI Lite / VCI 560.

WHEEL UP 2500/2000mAh usb rechargeable battery mini bicycle front lights cycling flashlight 4 modes

WHEEL UP 2500/2000mAh usb rechargeable battery mini bicycle front lights cycling flashlight 4 modes

1. Wide floodlight about 85°, 2nd generation bright XPG beads.
2. USB rechargeable built-in battery.
3. IPX3 waterproof
4. LED backlight botton
5. 2500mAh battery USB rechargable,for V9C400, 2000mAh for V9C200, handlebar clip
6. V9C-400 / V9C -200 two modes.
( TIPS: V9C-400 is brighter than V9C-200, please don’t choose wrong mode )
7. 5 flash mode
8. Aerospace aluminum alloy 6063 body.
9. Size: about 101mm * 23mm.
-V9C
V9C_01 WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch Headlight WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch HeadlightV9C-200
WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch Headlight
V9C_05V9C_06V9C_07V9C_08V9C_09V9C_10V9C_11V9C_12
   WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch Headlight WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch Headlight
WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch Headlight WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch Headlight WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch Headlight WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch Headlight WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch Headlight WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch Headlight
WHEEL UP Usb Rechargeable Bike Light Front Handlebar Cycling Led Light Battery Flashlight Torch Headlight

SKP1000 Tablet Auto Key Programmer A Must Tool for All Locksmiths Perfectly

1. Powerful Auto Key Programming with multifunctions like mileage correction,remote controller, Oil/service Reset, throttle body adjustment, EPB, pin code calculation and special function,Perfectly Replace CI600 Plus and SKP900
2.One Year free update: One Key Upgrade,Support Firmware update
3.Manufacturer: Lonsdor (Same manufacturer as Lonsdor K518 and CI600 Plus)
4.Suppoted Language:English only, more language is waiting to release.
5.Supported Protocols: SAE-J1850 PWM, SAE-J1850 VPW, KWP2000, ISO-9141, CANBUS, SINGLE CAN
6.SKP1000 Programmer vehicle coverage: Support almost all cars in the world, such as BMW, Benz, Audi, Volkswagen, Ford, Land Rover, Chrysler, Jeep, Toyota, Nissan, Honda, Mitsubishi, Hyundai, Kia, and so on.SKP1000 also can do Mileage Adjustment, Support Ford and Nissan pin code calculate.

SKP1000 Key Programmer Features:

Nice Red color
Handheld with 4″ display screen
Not too heavy to hold, very easy to take

SKP1000 Car Key Programmer Functions List:

Clear key memory;
Program keys, proximity keys, smart key, flip keys;
Program after-market and OEM keys;
Read keys from immobilizer memory
New mechanical key number programming;
Vehicle identification key programming;
Reset ECU& Reset immobilizer;
New remote controller programming;
Immo PINCODE reader for many vehicles and no need pincode when programming keys for many vehicles
Mileage adjustment via OBD;
With full and strong database for the most important vehicle makes;
Remote assistance
EEPROM chip read and immobilizer initialization;
EPB(Electric park brake);
throttle body adjustment
Oil/Service reset;
EEPROM/PIC adapter
Tip: read the SKP1000 user manual for how to perform these functions.

SKP1000 Key Programmer-1
SKP1000 Key Programmer-2

John Deere Service Advisor EDL V2 Diagnostic Kit

Support Languages: English, French, German, Italian, Portuguese, Russian, Spanish.

John Deere Service Advisor  Agriculture workshop service manual, repair manual, electrical wiring diagram, hydraulic diagram, diagnostic, assembly and disassembly engine, transmission.
John Deere AG Management Solutions, Attachments, Backhoes, Combines and Headers, Cotton Harvestings, Excavators, ForkLifts, Hay and Forages, MAte Hand Cut and Shredderses, Plantings and Seedings, Skid Steers, Sprayers, Sugar Cane Harvesters, Tillages, Tractors, Worksite Pro Attachments.
John Deere Service Advisor  CF (Construction and Forestry), workshop service manual, repair manual, diagnostic, electrical wiring diagram, hydraulic diagram John Deere.
John Deere Service Advisor  CCE (Commercial and Consumer Equipment)dealer technical assistance, diagnostics, connection readings, calibrations, interactive tests, specification, tools, assemble and disassemble presented all models John Deere Construction Equipment and some models Hitachi, Euclid, Bell and Timberjack.

JOHN DEERE diagnostic adapter for construction equipment, agriculture, engines John Deere.

How to Program DAF keys with FVDI2, VCI Lite or VCI 560

There are three optional solutions of programming a DAF key using different DAF diagnostic tools/key programmers (FVDI2, VCI Lite (V1), VCI 560), which may help make keys in a cost-effective method.
Option I: Flyobd FVDI2 DAF commander: 
It’s the cheapest way to program a DAF key with FVDI2 commander.
How to making a DAF key with FVDI2 DAF?
Note: Before programming keys, all present keys are reset and can be programmed on the same immobilizer only.
Start FVDI2 software for DAF
Select “Key learning”
Press “Next” to go on
Put the key to be programmed into the contact and switch it to position contact-ON
Insert Key 1 and press “Next”
The key is programmed successfully!
Amount of keys programmed: 1
To learn the next key, press “Next”
To fish key learning, press “Exit”
Option II: DAF VCI 560 (genuine): $3550
Option III: VCI Lite (V1) (copy version of VCI-560): $800
First, DAF VCI lite or VCI 560? Here list the differences.
* price
new DAF VCI lite (V1)for $800, original VCI 560 for $3550
* connection
DAF VCI lite used via USB connection, VCI 560 used via WIFI & USB connection
* LED display
VCI lite without LED display, VCI-560 kit with LED indicators
* PCB (hardware)
VCI lite hardware lacks one part on PCB, compared to VCI-560
(that missed part is not needed for any diagnosis, reprogramming, configuration)
* via OBD
VCI lite cannot see ignition via OBD, VCI-560 can do that via OBD
* function
DAF VCI 560 supports SCR/AdBlue removal, power increase, language programming with DAVIE Configurator (DEVIK)
VCI-560 also supports special programming and Service Level see DAVIE Developer Tool (DEVIE DT)
However, functions above are not listed in the DAF VCI lite package; that is, you need to buy in the DAF company.
In short, no matter VCI 560 or the replacement VCI Lite (V1), both work well on DAF trucks almost the same except some aspects above. If you do not care about original or not, VCI Lite should be a good choice for you, which almost has the same functions as VCI-560 but at a lower cost. DAF VCI Lite (V1) is more cost-effective.
So, how to program a DAF key using VCI 560 or VCI Lite (V1)?
Start DAVIE software
Go to Immobilizer (safety/security system)
Then programming

Program keys

before programming keys, all present keys are reset and can be programmed again in the same immobilizer only
Match immobilizer
Before installing a new immobilizer unit, perform the following actions:
1- switch off contact
2- exchange the immobilizer unit
3- switch on contact
Good luck when program daf keys with FVDI2 or VCI Lite / VCI 560.